As soon as you remove your POWERPLAY from the box and connect it to a computer, the receiver embedded inside the charging base is in pairing mode. The G logo flashes blue while in pairing mode, and the charging base can be paired with a compatible gaming mouse without downloading additional software.

NOTE: If your POWERPLAY is already paired with a mouse, you will need to use Logitech Gaming Software (LGS) to put the charging base into pairing mode again.

• First time pairing
• Pairing POWERPLAY charging base with a different mouse

First time pairing

1. Disconnect any gaming mouse wireless receiver that is connected to your computer.
2. Turn your mouse over and push the power switch either left or down to turn off the device.

   

3. Connect the POWERPLAY charging base to your computer using the supplied micro-USB to USB cable.

   

4. Turn your mouse over and use your thumb to press on the bottom of the weight door (as shown). Remove the weight door from your mouse.

   

5. Insert the POWERCORE module into your mouse. The module has magnets to help guide it into place.

   

6. Push the power switch either up or right to turn on the mouse.

   

Pairing POWERPLAY with a different mouse
You can use Logitech Gaming Software (LGS) 8.94 or later to put the charging base into pairing mode, allowing you to pair it with a different mouse. Here’s how:
NOTE: If you don’t have Logitech Gaming Software, you can get the latest version from the LGS Download page.

1. Launch LGS.
2. Select the POWERPLAY Wireless Charging System.
3. Click the POWERPLAY Connection Settings icon.

   

4. In the Connection Settings window, click Connect to a different mouse.

   

5. The G logo on the charging base starts flashing blue and a message appears on-screen.

   

6. Disconnect any gaming mouse wireless receiver that is connected to your computer.
7. Turn your new mouse over and use your thumb to press on the bottom of the weight door (as shown). Remove the weight door from the mouse.

   

8. Insert the POWERCORE module into the mouse you want to pair with the charging base. The module has magnets to help guide it into place.

   

9. Push the power switch either up or to the right to turn on your mouse.

   

10. The G logo on the charging base returns to the color selected in LGS, the prompt disappears and your mouse is detected.