- Select the profile you wish to assign commands to. Otherwise, use the DESKTOP - Default profile.
- Click on the device you wish to bind with the assignment and then go to the Assignments tab.
- For simple key commands, click on the KEYS tab. This will show all available keys. Scroll down the list to the key you want to assign/bind.
- In the example below, the ‘1’ key is bound to the Forward button. Click anywhere in the 1 cell on the left and drag it onto the white circle on the Forward button.
- Once the button is programmed it should appear as shown below. G5 is listed in the cell for key “1”. This indicates that the command is bound to the button. You can bind the same key to more than one button if you wish.
- To remove the binding, click on the button or the command name on the line. You'll see two options:
- USE DEFAULT
- DISABLE
- Click USE DEFAULT to reset the button to factory settings.
- Click DISABLE to deactivate the button and clear any programming.
- To enable the button, click on it again and either drag an assignment back onto it or click USE DEFAULT.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version.
Compatible Product
