Your headset is already paired to the receiver it ships with — just turn the headset on. The headset is successfully connected when the LED on the receiver turns solid white.

If your headset and receiver lose pairing or if you have a replacement receiver and need to re-pair, you can reconnect your headset using Logi Tune.

1. Plug the USB-C receiver or USB-A adapter with the USB-C receiver into a USB port on your computer.

2. Power on the headset by sliding the power switch to the center.
    

   NOTE: Image is illustrative and may vary from the actual product.

3. Download and install Logi Tune and open it on your computer.
4. Select Zone Receiver from the dashboard and wait while it looks for the previously connected headset.
5. If no headset is shown as connected to the receiver, click Pair headset.

6. Enter pairing mode on the headset by sliding the power switch to the Bluetooth icon and holding it for two seconds. The LED will flash blue rapidly.
   

   NOTE: Image is illustrative and may vary from the actual product.

7. Once successfully paired, the LED on the receiver and on the headset will turn solid white.