You may need to manually reset your Circle View Camera in some troubleshooting situations when other pathways have not worked. Here's how to perform a manual reset:

1. Power on the camera by connecting the USB connector from the cable into the provided indoor power supply and plug this into a compatible wall outlet.

    

2. Locate the button on the back of the camera.
3. Press and hold the button and let go when you see the rapid blinking magenta Status LED and hear two beeps (about nine seconds).

    

   The camera will reset itself.
4. You’ll know it’s successful when the camera Status LED turns solid green which indicates that the camera is ready to be set up again.