You can connect your devices to the Z407 speakers in three different ways. You can use:
NOTE: When you turn the speakers on, they will default to the last connection used. To switch between devices, use the wired input button and the Bluetooth button on the bottom of the dial.
- On the source device, make sure Bluetooth is turned on.
- Turn the Z407 speakers on.
- On the bottom of the control dial, press and hold the Bluetooth button for two seconds to activate pairing mode. The status indicator will blink quickly.
- In your source device’s Bluetooth menu, locate and select Logi Z407 from the device list to complete the connection.
Your source device should now be paired and connected to your Z407 speakers. You can pair up to eight Bluetooth source devices with your speakers and connect to two of them at once.
- Connect your device to the speakers using the USB cable.
NOTE: The cable is not provided and should be purchased separately. - Turn the speakers on.
- Make sure that the LED indicator lights up in white. If it doesn’t, press the wired input button to switch.
- Connect your device to the speakers using a 3.5mm auxiliary cable (3-pole, male to male).
- Turn the speakers on.
- Make sure that the LED indicator lights up in purple. If it doesn’t, press the wired input button to switch.
Wichtiger Hinweis: Das Firmware Update Tool wird von Logitech nicht mehr unterstützt oder gepflegt. Wir empfehlen dringend die Verwendung von Logi Options+ für Ihre unterstützten Logitech-Geräte. Während dieser Übergangsphase stehen wir Ihnen gern zur Seite.
Wichtiger Hinweis: Der Logitech Preference Manager wird nicht mehr von Logitech unterstützt oder gepflegt. Wir empfehlen dringend die Verwendung von Logi Options+ für Ihre unterstützten Logitech-Geräte. Während dieser Übergangsphase stehen wir Ihnen gern zur Seite.
Wichtiger Hinweis: Das Logitech Control Center wird nicht mehr von Logitech unterstützt oder gepflegt. Wir empfehlen dringend die Verwendung von Logi Options+ für Ihre unterstützten Logitech-Geräte. Während dieser Übergangsphase stehen wir Ihnen gern zur Seite.
Wichtiger Hinweis: Logitech Connection Utility wird von Logitech nicht mehr unterstützt oder gepflegt. Wir empfehlen dringend die Verwendung von Logi Options+ für Ihre unterstützten Logitech-Geräte. Während dieser Übergangsphase stehen wir Ihnen gern zur Seite.
Wichtiger Hinweis: Die Unifying-Software wird von Logitech nicht mehr unterstützt oder gepflegt. Wir empfehlen dringend die Verwendung von Logi Options+ für Ihre unterstützten Logitech-Geräte. Während dieser Übergangsphase stehen wir Ihnen gern zur Seite.
Wichtiger Hinweis: Die SetPoint-Software wird von Logitech nicht mehr unterstützt oder gewartet. Wir empfehlen dringend die Verwendung von Logi Options+ für Ihre unterstützten Logitech-Geräte. Während dieser Übergangsphase stehen wir Ihnen gern zur Seite.
Häufig gestellte Fragen – FAQs
Für diesen Abschnitt sind keine Produkte verfügbar