Sustainability Navigation

[Feature request] Make MX Keys easy switch the mouse too

Beantwortet

Kommentare

520 Kommentare

  • unikeys

    Whilst they are working on a permanent solution I would already be happy if I can use the button on top of the mouse to switch across to the next channel.

    Better than constantly flipping the mouse upside down and then back again

    4
    Aktionen für Kommentare Permalink
  • Finn Zhou

    Please... Request Logitech to include this feature, many users who need to switch devices do not have the ability to place them on the same network, many companies LAN and Internet are separate, we very much need this feature without the help of Flow, or an offline version of Flow.

    4
    Aktionen für Kommentare Permalink
  • MarcelHoffs7160

    This feature is very much needed. Especially since a lot of people are working from home. Switching between home and work device is common practice.

     
    4
    Aktionen für Kommentare Permalink
  • Mark7460

    As a product manager, it is difficult to believe that the Logitech team did not consider the use case of being able to switch between computers via the MX Keys buttons alone.  While Flow functionality is a neat, but mostly a worthless trick, I have a difficult time believing that the Logitech team considered the Flow feature a viable replacement for an easy switch between computers.  Especially, since the obvious use case is to mirror KVM switch functionality.  I challenge the smart people at Logitech to make this happen.  In the meantime, Logitech should put an obvious disclaimer on the website and on product packaging. Additionally, Logitech should cease selling these two products together or in a bundle.

    4
    Aktionen für Kommentare Permalink
  • RoboAddy

    I don't think any of us are going to shut up about it until it's actually implemented.

    4
    Aktionen für Kommentare Permalink
  • Christian G.

    We now heard multiple times in this thread that the Logi Support will forward the massive feedback (1 year of non-stop complaints) or already has forwarded the word of the customer.

    However, what is going to happen? What is the roadmap? What is the impact? Is the Logi Support inside of Logitech seen? Is their word put into the software design planning?

    I mean, seeing one year of straight customer complaints with feedback the kind of "we hear you and forward" seems not to bring any value.

    So, again, I would like to know if I can buy from Logitech or not due to lacking advertised, essential features.

    4
    Aktionen für Kommentare Permalink
  • unikeys

    Trevor Morgan I think you want to speak to Paolo Passeri who is their  Head of Product, C&P Software at Logitech. You can reach him via LinkedIn: https://www.linkedin.com/in/paolopasseri/

    You know he will understand because on his bio he writes:
    "I have a passion for creating and managing products that empower users and make their lives better.."

    4
    Aktionen für Kommentare Permalink
  • Axel Haustant

    Just to share, but I gave up on Logitech products. 

    Got multiple mouses (MX Master 3 + MX Anywhere 3) + MX Keys and was fooled by the false promise as everyone. Logitech never really answered, never even acknowledged or apologized for lying on the product (and no, saying you are sorry for the inconvenience but not being able to make a statement to tell wether or not you will support this use case is not an apology, it's only communicational bullshit to do damage control).

    My guess: they are releasing Logi Bolt products based on a new receiver and soon they will will say: just buy the new Bolt products, it's implemented on it but receiver is not compatible so you need to buy again both mouse and keyboard.

    I had issues with G560 RGB speakers too (sounds is cuttings randomly, whatever the port used), never fixed, never acknowledged too.

    There is also a focus stealing issue on Unifying update client (it drops you out of the games), never acknowledged, never fixed.

     

    As a result:

    - I sold all my Logitech products

    - I bought a cool custom mech keyboard, a cool ergonomic mouse

    - I bought some standard speakers, sad to loose RGB lighting, but it was not working that well

    - replaced all the logitech software crap with a real KVM

    Totally satisfied, no more issues, works whatever the network you are on, whatever the hardware plugged in, whatever the OS (Linux+Windows in my case)... And I don't rely unfinished products and software anymore (no more focus stealing during games, no more sound lost during games and movies).

    Bye Logitech, see you never !!!

    4
    Aktionen für Kommentare Permalink
  • Floris Rijnhart

    Since Logitech is probably never going to make this happen, does anyone know a brand that does offer this feature? Thinking about throwing my MX Keys and MX Master 3 (should be a SET Logitech!) in the thrash for another brand that does offer this SIMPLE feature.

    4
    Aktionen für Kommentare Permalink
  • Brandt Beal

    +1.  This is absolutely needed.  I would like to use this setup with my work computer and my home computer.  Flow won't work because work computers are isolated by firewall and flow will never be able to see the other computer.  Having to switch them independently isn't a good solution.  

    3
    Aktionen für Kommentare Permalink
  • Jeff Leonor

    please add it Logitech!

    3
    Aktionen für Kommentare Permalink
  • Dennis9223

    Logitech please add this feature ...  and communicate with your customers.. so much posts over weeks .. please react 

    3
    Aktionen für Kommentare Permalink
  • 柏廷 劉

    Please add this feature, I have two PCs in different network and flow can not be used. Binding keyboard amd mouse would be a great idea!

    3
    Aktionen für Kommentare Permalink
  • Malte

    We really need this feature! Flow is not possible on VPN work PCs and/or Linux.

    3
    Aktionen für Kommentare Permalink
  • Jürg Huwiler

    Does Logitech even care about these voices? An official statement would be great! Is this function in the backlog? 

    3
    Aktionen für Kommentare Permalink
  • David Jiménez

    For me this is the only thing missing from this keyboard and mouse combination.... +1 to implement it as soon as possible!

    3
    Aktionen für Kommentare Permalink
  • Nord

    Any word on this? Is it being considered?

    3
    Aktionen für Kommentare Permalink
  • Dennis9223

    @Jose M Herrero I created a new post with the same original text... hope it gets some attention :)

    3
    Aktionen für Kommentare Permalink
  • Vlad Radoiu

    Let's not forget that there is another piece of hardware involved here => the Logitech receiver. So, probably they can implement it in the Keyboard+Mouse+Receiver firmware (that's why you have the ability for FW updates right?)

    Yes, I do not care about bluetooth (for this particular feature). Probably most users here would be fine with using Logitech receiver and having this feature.

    3
    Aktionen für Kommentare Permalink
  • Josu Du

    Bought the MX Keys because I assumed that I can switch both mouse and keyboard with the three keys.
    Flow isn't much reliable. Sometimes it works sometimes not. Make this feature happen, please.

    3
    Aktionen für Kommentare Permalink
  • Adrien Jamin

    Hi,

    yes this is a "must have" and the answer that it is hard to do is not satisfying. There is obviously already a channel from the computer to make the mouse switch. My guess is that the issue resides maybe in the fact that the keyboard might not tell to the computer where it goes.

    It might be difficult to fix but still a satisfying answer would be "we heard you and we will put all the necessary efforts to make this happen as soon as possible".

    There could also be some intermediate solution proposals too, for example making the switch happen for both mouse and keyboard through a click on the flow mouse icon, even if flow doesn't fully work.

    BR,

    3
    Aktionen für Kommentare Permalink
  • Ryan Hapgood

    I agree with all the comments... but we're not getting anything soon so if you want to check out this thread you may find solutions that work for you: https://github.com/Logitech/logi_craft_sdk/issues/28

    I have my Mx Keys, Mx Master 3 and monitor/tv all switching at the click of a button... now as convenient as it should be out of the box.

    Solaar may also be an option if you're using Linux.

    3
    Aktionen für Kommentare Permalink
  • Ryan Hapgood

    Look back through the comments and you’ll find it’s mostly possible. I have a nice script mapped to my MX3 mouse thumb button that switches between my work and desktop machines, (mouse, keyboard and monitor) even when connected to works VPN.
    Obviously it’d be better if Logitech supported it officially but I think we’re beyond the “is it possible stage”.

    3
    Aktionen für Kommentare Permalink
  • Ye Shi

    Oh my, even 8 pages of comments and almost 2 years could not make Logitech start to work on this feature. Is there some barrier not to do so? Such as patient?

    The flow is a good idea to switch with multiple screen settings, but its delay is so long and there is a couple of seconds gap neither screen has a mouse or keyboard.

    Additionally, I have a Linux machine, it doesn't support the Flow. Please create this feature, it wouldn't be hard. I also code a lot.

     

    3
    Aktionen für Kommentare Permalink
  • Claus Veirup

    Unfortunately Flow does not work even if the two computers are on the same physical network, when one of them is a company PC that connects through VPN.

    And then of cause when you only have one monitor (which is probably the most used scenario when you need this functionality)...

    I don't care if it does not work on IOS or Android. Try to make it work on Windows at least and go from there. Put it into Options+ beta then you don't have to support everything at once. Just give us this essential very needed functionality - which I thought was already there when I bought my MX keys and Master 3 mouse.

    That said the MX keys are the best keyboard I have had in 25 years - and I've had a lot...

    3
    Aktionen für Kommentare Permalink
  • Jan Folfas

    Adrian Gabriel Alexandrescu here you have:

    C:\Users\jan\bin\hidapitester.exe --vidpid 046D:C52B --usage 1 --usagePage 0xFF00 --open --length 7 --send-output "0x10,0x01,0x09,0x11,0x00,0x00,0x00"
    C:\Users\jan\bin\hidapitester.exe --vidpid 046D:C52B --usage 1 --usagePage 0xFF00 --open --length 7 --send-output "0x10,0x02,0x0a,0x1d,0x00,0x00,0x00"

    it's for Master 3 and MX Keys.
    hidapitester - https://github.com/todbot/hidapitester/releases

    In case it's not working for you, please read following:
    https://github.com/Logitech/logi_craft_sdk/issues/28
    you should play with the last parameter (i.e. "0x10,0x01,0x09,0x11,0x00,0x00,0x00").
    In my case the problem was with second byte ("0x10,THIS,0x09,0x11,0x00,0x00,0x00") - I believe it's index of device registered under Logitech Unifying Receiver.

    Whenever it's working for you, you can save it as a bat file, and then create EXE app out of it. Then you can bind it to any mouse button using Logitech Option.

    3
    Aktionen für Kommentare Permalink
  • Daniel Chiang

    Jan Folfas

    Thank you for linking the scripts above! I was able to get it working and can now switch seamlessly between my systems.

    As you mentioned, there was some trial and error, but was able to figure it out by just testing out different numbers with the second byte. In the end, this is what worked for me

    MX Master 3 Mouse - 1 to 2
    hidapitester.exe --vidpid 046D:C52B --usage 1 --usagePage 0xFF00 --open --length 7 --send-output "0x10,0x01,0x0a,0x11,0x01,0x00,0x00"
    MX Keyboard - 1 to 2
    hidapitester.exe --vidpid 046D:C52B --usage 1 --usagePage 0xFF00 --open --length 7 --send-output "0x10,0x03,0x09,0x11,0x01,0x00,0x00"

    MX Keyboard - 2 to 1
    hidapitester.exe --vidpid 046D:C52B --usage 1 --usagePage 0xFF00 --open --length 7 --send-output "0x10,0x03,0x09,0x11,0x00,0x00,0x00"
    MX Master 3 Mouse - 2 to 1
    hidapitester.exe --vidpid 046D:C52B --usage 1 --usagePage 0xFF00 --open --length 7 --send-output "0x10,0x02,0x0a,0x11,0x00,0x00,0x00"
    3
    Aktionen für Kommentare Permalink
  • Łukasz Paździorek

    I could not describe it in a better way. Come on Logitech, you can do it!

    3
    Aktionen für Kommentare Permalink
  • RoboAddy

    Unhelpful, Siddharth.
    I think that same reply has been pasted in this thread multiple times...

    3
    Aktionen für Kommentare Permalink
  • MarcelHoffs7160

    This functionality is very very needed. Though I can understand that it is a bit difficult to implement. Because if you want to implement this properly, independent of the OS, it is actually something that has to be baked into the firmware of the devices and probably even the receivers. Definitely not straightforward if this hasn't been planned from the start.

    Though even without this you can accomplish a working setup. Currently I have a Windows and a Linux machine where I switch between with 1 button press. It works perfectly. Though it relies on software installed on Windows side and on Linux side. Not ideal... but workable.

    I have documented my steps on my GitHub page. Maybe somebody finds this useful:

    https://github.com/marcelhoffs/input_switcher

    3
    Aktionen für Kommentare Permalink

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.