Technical Specifications
Transducer Type: Condenser, Pressure Gradient
Polar Patterns: Cardioid
Frequency Response: 20Hz – 20kHz
Sensitivity: 34.9 mV/Pa at 1 kHz (1 pa = 94 dB SPL)
Output Impedance: 50 ohm
Rate Load Impedance: Not less than 1k ohm
Maximum SPL: 136 dB SPL (1k, THD 0.5%)
S/N Ratio: 73 dB-A
Noise Level: 16.4
Dynamic Range: 119.6 dB
Power Requirement: +48V DC Phantom Power
Weight: 336g
Dimensions: 220.5mm x 45mm
HPF: 100Hz, 12db per octave
PAD: -20dB
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version.
Compatible Product
