When you leave for the day, use POP and Hunter Douglas to preserve your privacy. For example, as you're leaving your house, you single press a POP button / switch mounted on the wall near your front door; your connected blinds all go down. It's time to leave. Things are simple when you use POP with Hunter Douglas.

Add Hunter Douglas

1. Ensure your POP bridge and Hunter Douglas are on the same Wi‑Fi network.
2. Open the Logitech POP app on your mobile device and select MENU in the upper left-hand corner.
3. Tap MY DEVICES followed by + and then Hunter Douglas.
4. Next, you’ll need to sign into your Hunter Douglas account.

Create a recipe

Now that your Hunter Douglas device or devices have been added, it’s time to set up a recipe that includes your device(s):

1. From the home screen, select your button / switch.
2. Under your button / switch name, select the press configuration you would like to use (single, double, long).
3. Tap Advanced Mode if you'd like to set this device up using a trigger.
   (tapping Advanced Mode will also further explain this option)
4. Drag your Hunter Douglas Device(s) to the center area where it says DRAG DEVICES HERE.
5. If needed, tap the Hunter Douglas device(s) you just added and set your preferences.
   • This is where you'll select which scene to use with POP.
   • Scenes are set up using the Hunter Douglas app.
6. Tap ✓ in the upper right-hand corner to complete your POP button / switch recipe.

Technical Specifications

Required: Hunter-Douglas PowerView Hub.
Compatibility: All shades and blinds that are supported by the PowerView Hub, multi-room scenes cannot be imported.
Notes: Logitech POP supports starting scenes, but does not support control of individual coverings. Support is limited to one PowerView Hub at a time.