To optimize the view behind a window, perform the following steps in the Home app:
- Open the camera Live view.
- Tap the settings icon on the top left — this should bring up the settings menu for the camera.
- Toggle off the Night Vision Light. This will remove any glare caused by the night vision light from the camera and rely solely on the light from outside to illuminate the view.
NOTE: If your Live stream or recordings are not well-lit, we recommend that you use an external IR light, such as the LIFX lights, for illumination.
You can learn more about Circle View Camera's night vision here. - Toggle off the Camera Status Light. This will remove any glare caused by the Status LED in the video.
NOTE: When placed behind a window to look outside, the camera's view and image quality will be impacted due to reflections from the inside of the house on the glass as well as those caused by the glass itself.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section