The G304 X supports both 2.4GHz wireless (with LIGHTSPEED wireless technology) and USB-C wired connections. Follow the steps below to connect your G304 X to your computer:
Wireless connection
You can connect the G304 X wirelessly using the included LIGHTSPEED USB receiver.
- Remove the LIGHTSPEED receiver from the package and plug it into your computer.
- Turn on the mouse using the power switch on the bottom (the switch shows blue when powered on).
- The mouse will automatically pair with the LIGHTSPEED receiver.
NOTE:
- Keep the mouse and receiver at least 2 meters away from wireless routers or other 2.4GHz wireless devices to minimize environmental noise.
- G304 X has a wireless range of up to 10 meters* of wireless range. To ensure optimal performance in noisy wireless environments, it is recommended to keep the receiver within 20 cm of the mouse.
- Wireless range may vary depending on the operating environment and computer/system setup.
Wired connection
The G304 X includes a USB-C cable. Connect the USB end to your computer and the Type-C end to the mouse. You can continue using the mouse while it charges.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section