Some home entertainment devices need to warm up when first powered on before they will respond to a remote control. (For example, the TV volume won't go up right after you turn the TV on, but it does when you try again 10 seconds later).

If your devices aren't powering up properly, you can adjust the warm-up time (Power-on delay) to include a longer wait time after each device is powered on. A device can have a warm-up time ranging from 0 to 60 seconds.

• Preparing to adjust the Power-on delay

• Adjusting the Power-on delay in your account

• Adjusting the Power-on delay in your Harmony app

Preparing to adjust the Power-on delay

Before you adjust the Power-on delay in your account on myharmony.com, determine how long your devices take to warm up.

To prepare for Power-on delay modifications:

1. Make sure all devices you want to adjust are powered off.

2. Press the power button on the original remote and count the number of seconds it takes for the device to show a picture or output audio. Repeat for any additional devices you want to modify.

3. Note the amount of time required for your device to warm up, and then adjust the Power-on delay.

Adjusting the Power-on delay in your account

1. Log in to your account on myharmony.com.

2. Select your Harmony Smart Control from the Welcome screen.

3. Click Devices.

4. Click the device you want to update.

5. Click Change Device Settings.

6. Select Device delay settings and then click Next.

7. Enter the amount of time needed for the Power-on delay (in seconds) and then click Finish.

To update your smart device with these changes:

1. Log in to your Harmony app.

2. Tap Menu.

3. Tap Settings.

4. Tap Sync your Harmony.

NOTE: You can also sync your changes on the PC:

1. Connect your hub to the PC.

2. Log in to your account on myharmony.com.

3. Select your Harmony Smart Control from the Welcome screen.

4. Click Sync and follow the instructions to Sync from PC.

Adjusting the Power-on delay in your Harmony app

1. Launch the Harmony app.

2. Tap Menu.

3. Tap Settings.

4. Tap Edit devices and activities.

5. Tap Devices.

6. Tap the device you want to modify.

7. Tap Delay Settings.

8. Use the slider to select the appropriate power-on delay for your device (0-60 sec).

9. Tap Done to confirm and save the change.

Start the activity to test your changes.  If you need to adjust the delay a little more, follow the same steps and increase the time of the delay. Repeat for any other devices that have a power-on delay issue.