Your Alert system provides status LEDs on the camera, power supply and network adapter (Powerline Bridge).

• Controlling the LED on your Alert camera
• Controlling the LEDs on your Alert network adapter

Controlling the LED on your Alert camera:

1. Launch Alert Commander and select the Settings button.

   

2. In the left column select Cameras

   • Choose the camera name you would like to set
   • Under the Basic section, locate "Show LED for"
   • Disable LEDs by unchecking the appropriate box

   

3. Click the Apply button to save the setting.

Controlling the LEDs on your Alert network adapter:

1. Locate the switch on the side of the network adapter

2. Set the switch to turn the LEDs off or on.