Some home entertainment devices need to warm up when first powered on before they will respond to a remote control. (For example, the TV volume won't go up right after you turn the TV on, but it does when you try again 10 seconds later).

If your devices aren't powering up properly, you can adjust the warm-up time (Power-on delay) to include a longer wait time after each device is powered on. A device can have a warm-up time ranging from 0 to 60 seconds.

• Preparing to adjust the Power-on delay

• Adjusting the Power-on delay in your account

• Adjusting the Power-on delay on your remote

Preparing to adjust the Power-on delay

Before adjusting the power-on delay in your account on myharmony.com, you first need to know how long your devices take to warm up.

To prepare for power-on delay modifications:

1. Make sure all devices you want to adjust are powered off.

2. Press the power button on the original remote and count the number of seconds it takes for the device to show a picture or output audio. Repeat for any additional devices you want to modify.

3. Note the amount of time required for your device to warm up, and then adjust the power-on delay.

Adjusting the Power-on delay in your account

1. Log in to your account on myharmony.com.

2. Select your Harmony Touch from the Welcome screen.

3. Click Your Devices.

4. Click the device you want to update.

5. Click Change device settings.

6. Select Device delay settings and then click Next.

7. Enter the amount of time needed for the Power-on delay (in seconds) and then click Finish.

8. Click Sync to update your remote.

Adjusting the Power-on delay directly on your remote

1. On the LCD screen, tap the Menu icon.

2. Tap Settings.

3. Tap Devices.

4. Tap Delay settings.

5. Tap Change delays.

6. Tap the device you want to modify.

7. Tap POWER ON.

8. Use the slider to select the appropriate power-on delay for your device (0-60 sec).

9. Tap the back arrow (left-facing arrow at the bottom of the screen) to return to the previous page.

10. Tap Done to confirm and save the change.

Start the activity to test your changes.  If you need to adjust the delay a little more, follow the same steps and increase the time of the delay for any other devices that have a power-on delay issue.

NOTE: If these troubleshooting options don't match the display on your Harmony Touch screen, sync your remote so you have the most current version of the firmware and try again.