Battery life
The R500 runs for 12 months on a single AAA battery. When your battery is low, the R500 goes into a 'power-saving' mode — disable the laser to extend battery life so you can continue presenting for an extra week.
NOTE: Battery life may vary on user and computing conditions.
Smart power management
The R500 automatically goes into deep sleep after 30 minutes of inactivity.
NOTE: To prevent draining the battery when not used or when traveling, the R500 remote will instantly go to deep sleep if not connected to a device. The laser will also be automatically stopped after a continuous press of 2 minutes.
How to check battery status
Press and hold the laser button:
- If the LED is steady white: this means that the battery is good.
- If the LED is pulsing red: the battery is low and the laser is disabled to save power
| LED Behavior | Indication |
|---|---|
| Steady white | Battery is good |
| Blinking rapidly white | Device is attempting to pair using Bluetooth |
| Pulsing red | Low battery, laser is disabled to save power |
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
