-
Power switch
- When the power is on, the LED will glow solid green for five seconds when the battery power >= 10%. If the battery power is <=10%, the LED glows red for five seconds. The headset will power down automatically after 30 minutes of no audio to save battery life. To resume use, turn the power off, then back on again. The timeout value can be adjusted in G HUB.
-
Volume wheel
- Rotate up to increase the operating system volume.
- Rotate down to decrease operating system volume.
-
Microphone mute toggle
- Microphone is active when red is not visible. The microphone is muted when red is visible.
-
USB C charging port
- Use provided USB A to USB C charging cable to charge the headset by plugging into a USB port on the computer.
- Cable is for charging and firmware update only — audio will not play over USB.
-
Microphone
- For optimal voice pickup, place the foam ball approximately two fingers’ width from the corner of your mouth.
- Blue VO!CE functionality can be enabled using G HUB software.
-
Bluetooth / LIGHTSPEED Toggle
- Press to toggle between Bluetooth and LIGHTSPEED modes. The LED indicator glows steady blue for five seconds when put into Bluetooth mode, or cyan for five seconds when put into LIGHTSPEED mode.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
