Rally uses a special 3 way pairing between the remote control, the camera and the Display Hub. If the remote control is not working properly or you’re pairing the remote where either the remote control, the camera or the Display Hub are new, follow these steps:

1. Press and hold the button on the camera until the LED flashes.
2. Press and hold the button on the Display Hub until the LED flashes.
3. Press and hold the Bluetooth button on the remote control until the LEDs on both the camera and Display Hub stop flashing. 
4. If the pairing fails, repeat from step 1.

Additionally, check the batteries of the remote control and replace them if needed. The Rally remote control utilizes a CR2032 Lithium Battery. With average use, the battery should last 1-2 years.