- Connect the USB wireless adapter to a USB port on your computer.
- Insert a paperclip into the reset port located above the G logo and push the recessed button. The light on the adapter will blink rapidly to indicate pairing mode.
- Navigate to C:\Program Files\Logitech Gaming Software\FWUpdate\G533 and double-click G533Update_v13.exe to launch the firmware update. The following window appears:
NOTE: You can download the latest version of LGS from your gaming headset's Download page.
- Securely connect the G533 gaming headset to a USB port on your computer using the supplied cable.
- Slide the power switch upwards to the ON position.
- Locate the pinhole for the hardware reset switch, located on the top of the left ear cup assembly.
- Press and hold the hardware reset switch with a pin for two seconds. Repeat the two-second press twice.
- If the LED light on your headset was off, it should turn on and the firmware update should start.
NOTE: Do not disconnect your G533 gaming headset or USB adapter until the firmware update is complete.
- If the firmware update does not start, repeat steps 2-7.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
