Your speaker system connects to your audio-source device using a 3.5mm auxiliary connector.

To use your speakers:

1. Connect the satellite speakers to the subwoofer.

2. Connect the power cable to a power source.

3. Connect your source device using the 3.5mm auxiliary cable (attached to the control pod).

4. Turn the speaker on using the switch on the control pod.

5. Adjust the volume using the volume wheel on the control pod.

6. Play music from your audio-source device.

7. Adjust the bass level using the bass knob on the back of the subwoofer (optional).

NOTE: You can also connect headphones/earphones to the headphone jack on the front of the control pod.