You can connect the K480 keyboard to an Android device running Android 3.2 and later. Here’s how:
-
On your Android device, go to Settings > Bluetooth to turn on Bluetooth.
-
Turn the keyboard on by sliding the power switch on the bottom of the keyboard over to the right.
-
Using the device memory wheel on the top left of the keyboard, select 1, 2, or 3. You can save up to three devices to memory on the keyboard.
-
At the top right of the keyboard, press and hold the PC button until the light to the left of the button rapidly blinks blue.
-
On your Android device, in the Bluetooth Settings screen, tap once on Logitech Keyboard K480 to select it.
-
On your keyboard, type the PIN code displayed on your device’s screen, and then press Enter.
NOTE: Each connect code is randomly generated. Make sure you enter the one shown on your device’s screen.
Once you press Enter, the pop-up will disappear and the word Connected will show beside your keyboard in the Devices list.
Your K480 keyboard is now connected.
NOTES:
- Settings may vary between Android 3.0+ and 4.0+ devices. See your device’s user guide if you’re unable to pair the K480 keyboard.
- If the K480 is already paired but having problems connecting, you can remove it from the device list and follow the instructions above to connect it.