To connect with Bluetooth:
- Open Logitech Options.
- Click Add devices.
- Make sure your trackball is turned on by sliding the button on the bottom to the right.
- Turn the trackball over and press the Easy-Switch button to select a channel 1 or 2.
- Press and hold the Easy-Switch button for three seconds to enter pairing mode. The LED will start blinking quickly.
- Find the MX ERGO in your computer’s list of Bluetooth devices and connect it.
To connect using the Unifying receiver:
- Open Logitech Options.
- Make sure your trackball is turned on by sliding the button on the bottom to the right.
- Turn the trackball over and press the Easy-Switch button to select a channel 1 or 2.
- Press and hold the Easy-Switch button for three seconds to enter pairing mode. The LED will start blinking quickly.
- Find the MX ERGO in your computer’s list of Bluetooth devices and connect it.
- Open Logitech Options and click Add devices.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
