TECHNICAL SPECIFICATIONS
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz – 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200Ω
Rated Load Impedance: Not less than 1kΩ
Maximum SPL: 134 dB SPL (2.5kΩ, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.5 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kΩ) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm
Compatible with all nine Bottle Caps from the Blue Bottle Cap Series.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section