TECHNICAL SPECIFICATIONS
Transducer Type: Pressure Gradient
Polar Patterns: Cardioid
Frequency Response: 20Hz – 20 kHz
Sensitivity: 21.0 mV/Pa at 1kHz (1Pa = 94dB SPL)
Output Impedance: 150Ω
Rate Load Impedance: Not less than 1 kΩ
Maximum SPL: 138dB SPL (2.5kΩ, 0.5% THD)
S/N Ratio: 85dB-A (IEC 651)
Noise Level: 8.0 dB-A (IEC 651)
Dynamic Range: 130dB (@2.5kΩ)
Power Requirement: +48V DC Phantom Power (IEC 268-15)
Weight: 980g
Dimensions: 165mm x 61mm
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section