This happens because the G29, G920, and G923 wheels only have a single shifter port and weren’t originally designed to support an attached handbrake or sequential shifter.
If you’re using the Racing Adapter to connect an RS Shifter & Handbrake to the wheel, it uses that port, which was originally designed for a Driving Force Shifter, and will show up with an image of this device.
Even though an incorrect image is shown, it is still possible to use, and you can still update the bindings. If you’re on a PC, we recommend that you connect the device directly to an available USB port on your PC in order to have full functionality.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section