If you need to re-calibrate the X and Y axes of the stick, you should use the calibrate function in the HUD software. Go to the Settings, select the stick, and in the bottom of the window, click Calibrate.
Throttle
Clear axis calibration process for Throttle:
Clear axis calibration process for Stick:
- For all other axes, please follow the X56 RegEdit Calibration instructions
- If the RegEdit fix does not work then follow the instructions below:
Throttle
Clear axis calibration process for Throttle:
- Hold down TGL3 down and TGL2 up whilst plugging the throttle in.
- Then press TGL4 down and TGL3 up.
- Clear calibration is completed when all lights go out.
- Unplug/Replug the throttle.
- Move all axes to max and min twice.
- Press and hold TGL4 down, TGL3 down, TGL2 up together.
- Calibration is completed when all lights go out.
Clear axis calibration process for Stick:
- Hold down button A, HAT1 up, Flying Pinkie, Mini stick button.
- Clear calibration is completed when all lights go out.
- Unplug/replug the stick
- Move all axes except main stick X/Y axes to max and min twice.
- Move the Main stick X axis all the way to the left and then press the Trigger, button B and button D.
- Calibration is completed when all lights go out.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Show All Downloads
Compatible Product
