Use the following steps to set up 60 FPS streaming and background replacement for your C922 webcam and XSplit:

• 60 FPS streaming
• Personify background replacement

---

60 FPS streaming

1. On the main XSplit window, locate the Resolution and Frame Rate settings on the top right. Click the down arrow, and then Frame Rate to display available settings. Select 60 FPS.
2. Click the Resolution setting and select a resolution. Common resolutions are 1280x720 and 1920x1080. We recommend that you start with 1280x720 and then adjust accordingly,  depending on the load your bandwidth and PC performance will allow. Some PCs and broadband connections may not work well with higher resolutions.

   

3. Select your C922 Pro Stream camera as the capture source for your scene.  In the bottom left of the Scene window, click Add, and then click Webcam, capture card, video devices. Select C922 Pro Stream Webcam.

   

4. Once you’ve added your camera as a source for your scene, you’ll need to edit the settings to get 60 FPS output. Right-click C922 Pro Stream Webcam, click Configure, and then click Video Output.

   

5. In the Video Output window, change the following settings: 
   • Frame Rate — 60.00 
   • Color Space/Compression — MJPG 
   • Output Size — 1280x720 (even if the resized image is not 1280/720)

     

Once you have changed the settings and have the ideal lighting conditions, you should be able to achieve 60 FPS output from your C922 camera without any other setting changes. Right-click on the camera source in the scene window to check the current output of the camera, and look at the bottom of the options window for the output resolution, cropped image resolution, and output FPS.

If you’re unable to achieve 60 FPS after making these setting changes, the optimum lighting may not have been achieved. Try disabling the Low Light Compensation setting. Here's how:

1. Right-click the C922 camera in the scene window and click Configure.
2. Select Video Input. This will open Logitech Camera Settings for C922.
3. Click the Camera Control tab and uncheck the box next to Low Light Compensation.

   

---

Personify Background Replacement

ChromaCam by Personify is software that allows you to replace or completely remove your background during a stream. To set up ChromaCam with XSplit Broadcaster, follow these steps:

1. In the Scene window, click Add on the bottom left, and then click Webcam, capture card, video devices. Select ChromaCam Personify for C922.
2. You will be able to select from a few background replacement options. You can also remove the background completely by selecting the checkerboard pattern. 
   NOTE: The only resolution supported with ChromaCam is 1280x720 at 30 FPS.

   

    

   

Try the following tips for getting the best image from ChromaCam background replacement and removal: 

• Lighting and Contrast — the software used to replace and remove your background uses the subject’s head and shoulders as a reference point. Make sure there is a high contrast between the subject’s clothes and the background behind them.
• Movement — the software works best when the subject is still. 

See C922 Pro Stream Webcam 60 FPS and background replacement guide for additional information.