There are no Documents available for this Product. If you have questions, browse the topics on the left.
There are no Spare Parts available for this Product
There are no videos available for this product
There are no FAQs for this Software.
There are no Documents available for this Software. If you have questions, browse the topics on the left.
There are no Videos available for this Software.
Your POP button / switch uses two CR2032 batteries which should last around five years under normal use.
Remove battery
Peel back the rubber cover on the back of your button / switch using a small flat-head screwdriver.
Use a #0 Phillips screwdriver to remove screw at center of battery holder.
Remove the flat metal battery cover that you just unscrewed.
Remove the batteries.
Insert battery
Insert batteries + side up.
Replace flat metal battery cover and tighten screw.
Re-attach the button / switch cover.
When re-attaching the button / switch cover, be sure to position the batteries at the bottom. The logi logo should be directly on the other side and above the batteries if positioned correctly.
Important Notice: The Presentation software is no longer supported or maintained by Logitech. Logitech Presentation devices are now supported by Logi Options+ for a better experience. We highly recommend using Logi Options+ with your presentation remotes. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
Onboard Memory Manager is out of date. Please update to the most recent release.
Select Operating System to show Downloads.
There are no Downloads for Operating Systems not listed.
