- Low battery levels
- Plugging the receiver into a USB hub or other unsupported device such as a
- KVM switch
NOTE: Your receiver must be plugged directly into your computer. - Using your wireless keyboard on metal surfaces
- Radio frequency (RF) interference from other sources, such as wireless speakers, cell phone, and so on
- Windows USB port power settings
- Check the batteries or make sure your device is charged.
- Make sure the keyboard is On.
- Keep other electrical wireless devices away from the USB receiver to avoid interferences.
- Move the keyboard closer to the USB receiver.
- Unpair/repair or disconnect/reconnect hardware:
- If you have a Unifying receiver, identified by this logo,
see Unpair a mouse or keyboard from the Unifying receiver for instructions.
- If your receiver is non-Unifying, it cannot be unpaired. However, if you have a replacement receiver, you can use the Connection Utility software to perform the pairing.
- If you have a Unifying receiver, identified by this logo,
- Try a different USB port. If using a different USB port works, try updating the motherboard USB chipset driver.
- Windows only — check USB port power settings.
- Upgrade the firmware for your device if available.
- Try the device on a different computer.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section