- Battery charge level is low/empty
- Sound settings need to be corrected
- Headset volume level is very low
- The USB receiver is not connecting with headset
- Possible broken wire in the headset band
- Faulty headset driver
- Confirm the battery is sufficiently charged.
- Confirm the USB Wireless Mix Adapter is plugged directly into the motherboard.
- Avoid plugging it into a hub of any type; PC case USB ports will be considered hubs for troubleshooting purposes.
- Try using a USB extension cable to maintain a line of sight while troubleshooting.
- Check Windows settings:
- Make sure the volume slider in the application is not muted and the headset volume is at least 20%.
- Click on the volume icon and then click Volume Mixer.
- Make sure the slider in the volume mixer for all apps is at 100.
- Set G933 as the Windows Default Device:
- Right-click on the volume icon.
- Click Playback devices.
- Right-click on G933, and then select Set as default.
- Right-click on G933 again, and then click Test.
- Test Wireless OFF Mode:
- Connect the included 3.5 mm cable to the headset and test with a PC, Mac or mobile device.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
