The Inter-key Delay is the amount of time your Harmony remote pauses between sending commands.
For example, if the Inter-key delay is set to half a second (500 ms) for your cable box, pressing the number 8 key twice quickly will cause the remote to send 8, pause for half a second, and then send the 2nd 8 command.
To adjust the Inter-key Delay:
- Launch the Logitech Harmony Remote Software and login to your account
- Click on the
tab - Click on the
button next to the device you wish to adjust the Inter-key Delay for - Select Adjust the delays (speed settings) and then click on the
button
- Lower the value of the Inter-key Delay by entering the duration of time (in milliseconds). Once finished, click on the button. In this example, we will decrease the Inter-key Delay to 0 seconds.
- The Logitech Harmony Remote Software will then guide you through ensuring the Activities are setup correctly. Click on the button and follow the on-screen steps
- The last step is to update your remote for the changes you have made to be applied to your Harmony remote. Connect the Harmony remote to your computer's USB cable and click on the
button on the Harmony homepage
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
