Use the following steps to connect your K760 solar keyboard to your iPad:
iOS 6
To connect your keyboard to an iPad:
-
With your iPad turned on, tap the Settings icon.
-
In Settings, tap Bluetooth.
-
If the on-screen switch beside Bluetooth doesn't currently show as ON, tap it once to enable Bluetooth on your iPad.
-
Make sure the power switch on your K760 keyboard is set to ON, and then press the Bluetooth Connect button on the back of the keyboard.
NOTE: This is the round button labeled with the Bluetooth logo.
-
Select one of the three rapidly blinking Bluetooth keys at the top of the keyboard to assign to your iPad.
-
Tap once on the name of the device you want to pair.
NOTE: Depending on the keyboard you are pairing with your iPad, a different name may be shown.
-
If prompted, type the PIN code shown on-screen, and then press Enter or Return. If you're not prompted for a code, the keyboard should immediately pair and you can skip this step.
NOTE: Each connect code is randomly generated. Make sure you enter the one shown on your iPad screen.
Once you press Enter (if required), the pop-up should disappear and the word Connected should show beside your keyboard in the Devices list.
Your keyboard should now be connected to your iPad.
iOS 5 and earlier
To connect your keyboard to an iPad:
-
With your iPad turned on, tap the Settings icon.
-
In Settings, tap General and then Bluetooth.
-
If the on-screen switch beside Bluetooth doesn't currently show as ON, tap it once to enable Bluetooth on your iPad.
-
Make sure the power switch on your K760 keyboard is set to ON, and then press the Bluetooth Connect button on the back of the keyboard.
NOTE: This is the round button labeled with the Bluetooth logo.
-
Select one of the three rapidly blinking Bluetooth keys at the top of the keyboard to assign to your iPad.
-
Tap once on the name of the device you want to pair.
NOTE: Depending on the keyboard you are pairing with your iPad, a different name may be shown.
-
If prompted, type the PIN code shown on-screen, and then press Enter or Return. If you're not prompted for a code, the keyboard should immediately pair and you can skip this step.
NOTE: Each connect code is randomly generated. Make sure you enter the one shown on your iPad screen.
Once you press Enter (if required), the pop-up should disappear and the word Connected should show beside your keyboard in the Devices list.
Your keyboard should now be connected to your iPad.
Additional information
You can pair a device with each of the three Bluetooth keys at the top of your keyboard. To pair a different device, follow the link next to it in answer 360023248994 and assign it to one of the other Bluetooth keys.