You may need to manually reset your Circle View Camera in some troubleshooting situations when other pathways have not worked. Here's how to perform a manual reset:
- Power on the camera by connecting the USB connector from the cable into the provided indoor power supply and plug this into a compatible wall outlet.
- Locate the button on the back of the camera.
- Press and hold the button and let go when you see the rapid blinking magenta Status LED and hear two beeps (about nine seconds).
- You’ll know it’s successful when the camera Status LED turns solid green which indicates that the camera is ready to be set up again.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section