You can use Logitech Gaming Software (LGS) 9.00 or later to customize pointer settings on the G304 or G305 gaming mouse in two different modes:
NOTE: For help choosing between the two modes, see Choose between gaming mouse On-Board Memory and Automatic Game Detection modes.
Automatic Game Detection
In On-Board Memory mode, all of the customizations you make will be written directly to the mouse.
Your gaming mouse supports these pointer customizations in On-Board Memory mode:
Automatic Game Detection
- Open LGS
- In the Home window, make sure the blue toggle marker is set to Automatic Game Detection, and then click the glowing pointer-gear icon.
The Customize Pointer Settings window appears:
Your gaming mouse supports the following pointer customizations in Automatic Game Detection mode:
- DPI levels — Configure up to five levels, from 200-12000 in 50 DPI increments.
- Report rate (performance mode only) — Update from 125/sec (8ms response time) to 1000/sec (1ms response time).
- Per profile pointer settings — Enable different pointer behavior for each game profile.
- Acceleration — Enhance pointer precision – the mouse pointer increases speed when you move it. For some games, this can be turned off to improve accuracy.
- Power Mode — Choose between two power modes to optimize battery life for your needs.
- Under DPI Sensitivity Levels, drag the tick marks along the graph. For each DPI level, you'll see a tick mark with a unique color. The LED on top of the mouse shows the unique color of the active level while using DPI Cycling command. You can set up to five sensitivity levels.
NOTE: If you prefer, you can edit the list of DPI values to the left of the graph from 200-12000. For each DPI level you set, you'll see a tick mark rounded to the nearest 50.
For example: If you type in "682", the software will round to 700 DPI.-
Assign Default — One DPI level must always be the default. To change the default, click a DPI level that doesn't have a blue diamond above it, and then click Assign Default. This is the DPI level the mouse will return to when you:
- Press the default DPI button
- Switch between profiles
- Power up the computer
- Wake the computer from sleep mode
- Assign Shift — You can quickly activate a DPI level when you press the DPI Shift button. For example, you can set Assign Shift to a low DPI value, which will temporarily give you extreme precision. When you release the button, the mouse will revert back to the current DPI level. To set the Shift DPI, select a DPI level that isn't highlighted in orange, and then click Assign Shift.
-
Assign Default — One DPI level must always be the default. To change the default, click a DPI level that doesn't have a blue diamond above it, and then click Assign Default. This is the DPI level the mouse will return to when you:
- In Performance Mode, change the Report Rate, if you prefer something other than the default of 1000 reports/second (1ms response time). The Report Rate controls how often your mouse updates its position to the computer.
NOTE: The report rate setting cannot be changed while the gaming mouse is in endurance mode. Switch to performance mode if you want to increase the report rate.
The possible range is from 125/sec (8ms response time) to 1000/sec (1ms response time). You can:- Decrease processor use by reducing the report rate.
- Increase the mouse response by raising the report rate.
- Extend battery life by reducing the report rate.
- Make your preferred selections under Advanced. The options are:
- Enable per profile pointer settings — Select this option to enable each profile in LGS to have different pointer behavior (see Setting different DPIs for gaming-mouse profiles using Logitech Gaming Software for help).
-
Acceleration (Enhance Pointer Precision) — Select this option to use Window's "Enhance Pointer Precision" acceleration.
TIP: For gaming accuracy, we recommend leaving this unchecked, but you can enable it if you prefer the feel of default Windows acceleration. - Power mode — Click on the drop-down menu and select between HI for performance mode and LO for endurance mode. Report rate is fixed at 8ms while endurance mode is active to conserve battery life. In performance mode, the possible range is from 125 reports/sec (8ms response time) to 1000 reports/sec (1ms response time). For more information, see Performance and Endurance power modes on the G304 and G305 gaming mice.
In On-Board Memory mode, all of the customizations you make will be written directly to the mouse.
Your gaming mouse supports these pointer customizations in On-Board Memory mode:
- DPI levels — Configure up to five levels, from 200-12000 in 50 DPI increments.
- Report rate (Performance mode only) — Update from 125/sec (8ms response time) to 1000/sec (1ms response time).
- Power Mode — Choose between two power modes to optimize battery life for your needs.
- Open LGS
- In the Home window, make sure the blue toggle marker is set to On-Board Memory, and then click the glowing pointer-gear icon.
The Customize On-Board Pointer Settings window appears:
- Under DPI Sensitivity Levels, drag the tick marks along the graph. For each DPI level, you'll see a tick mark with a unique color. The LED on top of the mouse shows the unique color of the active level while using the DPI Cycling mouse function. You can set up to five sensitivity levels:
-
Assign Default — One DPI level must always be the default. To change the default, click a DPI level that doesn't have a blue diamond above it, and then click Assign Default. This is the DPI level the mouse will return to when you:
- Press the default DPI button
- Switch between profiles
- Power up the computer
- Wake the computer from sleep mode
-
Assign Shift — You can quickly activate a DPI level when you press the DPI Shift button. For example, you can set Assign Shift to a low DPI value, which will temporarily give you extreme precision. When you release the button, the mouse will revert back to the current DPI level. To set the Shift DPI, select a DPI level that isn't highlighted in orange, and then click Assign Shift.
TIP: Buttons you assign as DPI Up, DPI Down, DPI Shift and DPI Cycling will enable you to change between DPI levels rapidly.
-
Assign Default — One DPI level must always be the default. To change the default, click a DPI level that doesn't have a blue diamond above it, and then click Assign Default. This is the DPI level the mouse will return to when you:
- In Performance Mode, change the Report Rate, if you prefer something other than the default of 1000 reports/second (1ms response time). The Report Rate controls how often your mouse updates its position to the computer.
NOTE: The report rate setting cannot be adjusted while the gaming mouse is in endurance mode. Switch to performance mode if you want to change the report rate.
The possible range is from 125/sec (8ms response time) to 1000/sec (1ms response time). You can:- Decrease processor use by reducing the report rate
- Increase the mouse response by raising the report rate
- Extend battery life by reducing the report rate
- Click on the drop-down menu next to Power mode and select between HI for performance mode and LO for endurance mode. Report rate is fixed at 8ms while endurance mode is active to conserve battery life. In performance mode, the possible range is from 125 reports/sec (8ms response time) to 1000 reports/sec (1ms response time). For more information, see Performance and Endurance power modes on the G304 and G305 gaming mice.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Show All Downloads
Compatible Product
