Port assignment is typically used if you have the exact same device (same manufacturer, same model #) assigned to your Blaster and want to control them
independantly. There are 2 ports on the Blaster. A and B. Before you map one of your devices to a specific port on the Blaster, you must first map your device to the Blaster.
To assign one of your devices to a specific port, please follow these steps:
1) Press the Options button on the LCD screen
2) Press the the RF System Settings Button
3) Press the Advance RF Settings Button
4) Press the Advanced Device Assignments Button
5) Read the instructions on the LCD of the remote and press Continue
6) Select a Device
7) Select the Port you wish to use
8) Read the instructions on the LCD of the remote and press OK
9) Press the Done button
Note: Once you assign one of your devices to a specific port, you need to make sure that the your device is in line of sight of a mini-blaster that is connected to that port. If you map the device to specifically the Blaster, then your device needs to be in line of sight of the Blaster.