Your Alert system provides status LEDs on the camera, power supply and network adapter (Powerline Bridge).
- Controlling the LED on your Alert camera
- Controlling the LEDs on your Alert power supply or network adapter
Controlling the LED on your Alert camera:
-
Launch Alert Commander and click the Settings button.
-
In the left column, select Cameras.
- Choose the camera name you would like to set.
- Under the Basic section, locate "Show LED for".
- Enable or disable LEDs by selecting or clearing the appropriate box.
-
Click Apply to save the setting.
Controlling the LEDs on your Alert power supply or network adapter:
-
Locate the switch on the side of the power supply or network adapter.
-
Set the switch to turn the LEDs off or on.
Frequently Asked Questions
Show All Downloads