To connect your Spotlight device using the USB receiver:
- Remove the receiver from within the R500 remote by gently pulling on it.
- Plug the receiver into a USB port on your device.
Connect using Bluetooth
To connect your Spotlight remote using a Bluetooth connection:
- Hold and press the Laser button (top) and the Back button (bottom) on your R500 remote, as shown for 3 seconds.
The LED should start blinking rapidly and R500 should be available for pairing to Bluetooth for three minutes.
NOTE: Pressing any other button within 20 seconds of initiating Bluetooth pairing will turn pairing mode off.
- Complete the pairing process on your device. For more information, see Connect your Logitech Bluetooth device.