To check the battery level of your pen, slide the power button:
- Three green lights mean the battery is sufficient and greater than 66%
- Two green lights mean the battery is sufficient and greater than 33%
- One green light means the battery is sufficient and greater than 15%
- One red blinking light means the battery is less than 15% and should be charged immediately
NOTE: A blinking red LED without a battery check means the battery life is critical and the pen should be charged immediately.
We recommend that you charge Crayon daily. A full charge can support up to 7 hours of active use. It takes approximately 30 minutes to fully charge Crayon.
To charge your Crayon:
- Insert the USB-C cable into the open end of Crayon.
- Connect the cable to a power adapter or any computer.
- The LED will blink green while it is charging. When fully charged, the LED will glow solid green.
NOTE: You cannot use the Crayon while it is charging.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section