You can connect your keyboard to an iPad or iPhone running iOS 5.0 or later. Here's how:

1. With your iPad or iPhone turned on, tap the Settings icon.

   

2. In Settings, tap General and then Bluetooth.

   

3. If the on-screen switch beside Bluetooth doesn't currently show as ON, tap it once to enable it.

   

4. Turn the keyboard on by sliding the power switch on the bottom of the keyboard over to the right.

5. Using the device memory wheel on the top left of the keyboard, select 1, 2, or 3. You can save up to three devices to memory on the keyboard.

6. At the top right of the keyboard, press and hold the "i" button until the light to the right of the button rapidly blinks blue.

7. On your iPad or iPhone, in the Devices list, tap Logitech Keyboard K480 to pair it.

   

8. Your keyboard may pair automatically, or it may request a PIN code to complete the connection. On your keyboard, type the code shown on-screen, and then press the Return or Enter key.

   NOTE: Each connect code is randomly generated. Make sure you enter the one shown on your iPad or iPhone screen.

   Once you press Enter (if required), the pop-up will disappear and the word Connected will show beside your keyboard in the Devices list.

   Your keyboard should now be connected to your iPad or iPhone.

   

NOTE: If the K480 is already paired but having problems connecting, you can remove it from the Devices list and follow the instructions above to connect it.