- Turn the keyboard on by opening the keyboard cover and snapping the bottom of the holder onto the magnetic strip above the first row of keyboard buttons. The status light on the upper right side of the keyboard turns green to indicate that the keyboard is on.
NOTE: If the status light is red, you’ll need to charge your keyboard battery. See Charge the Logitech Type-S Tab S2 keyboard case for more information.
After two seconds, the status light starts rapidly flickering blue.
NOTE: The first time you turn the keyboard case on, it enters discovery mode until it successfully pairs with your tablet (up to 15 minutes).
- On your tablet, tap the Settings icon and make sure Bluetooth is ON.
- Tap Type - S Tab E to pair the keyboard with your tablet.
- When prompted for a passcode, type the passcode shown on-screen, and then press Enter.
NOTE: The passcode needs to be entered using the Type-S keyboard. Do not use the tablet’s on-screen keyboard. - When the pairing is complete, the tablet will show Connected for your Keyboard Folio Type - S.
You should now be able to use the keyboard with any Android application that accepts keyboard inputs.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
