This tutorial will show you how to use the following features in Logitech Mouse and Keyboard software (SetPoint):

• Programming function keys
• Viewing battery status
• Disabling keys
• Using Unifying Software

Programming function keys:

The Function keys, or F-keys, are the keys labeled F1 through F12 above the number keys on your keyboard. The F-keys can be programmed to perform certain functions.

1. Launch SetPoint (Start > Programs > Logitech > Mouse and Keyboard > Mouse and Keyboard Settings).

   NOTE: If you do not have SetPoint installed, you can download it from the MK605 Downloads Page.

2. Choose the My Keyboard tab at the top and click the F key settings tab at the left.

3. Select the Wireless Keyboard K340 from the Select Keyboard drop-down menu:

   

4. Choose the F key you wish to assign from the Select F Key field:

   

5. Select the task you wish to assign from the Select F Task field. Click Help for detailed descriptions of these options:

   

   NOTE: Some options may generate a sub-menu. In this example, we chose to open a Web page. Enter the URL to be opened in the Select Web Page field.

   

6. Click Apply to save your settings. Click OK to exit SetPoint.

Viewing battery status:

You can check your keyboard battery status in SetPoint:

1. Launch SetPoint and select the My Keyboard tab at the top.

2. Select the Keyboard Batteries tab at the left side and choose the Wireless Keyboard K340 from the Select Keyboard drop-down menu:

   

3. Verify the battery status for your keyboard.

4. Click OK to exit SetPoint.

Disabling keys

You can disable keys you do not use:

1. Launch SetPoint and select My Keyboard tab at the top.

2. Choose the K340 keyboard from the Select Keyboard drop-down menu:

   

3. Use the checkboxes to disable the options as shown above. Click Help for detailed descriptions of these options.

4. Click Apply to save your settings. Click OK to exit SetPoint.

Using Unifying Software:

Your MK605 ships with the new Unifying software, which allows you to use a single Unifying USB receiver for multiple supported Logitech products. You can launch the Unifying software from this tab.

1. Launch SetPoint (Start > Programs > Logitech > Mouse and Keyboard > Mouse and Keyboard Settings).

2. Click the My Keyboard tab at the top and select the Unifying tab from the left as shown below:

   

3. Click Open Unifying Software to launch the Unifying software. For instructions on connecting additional devices to your Unifying receiver, please see Knowledge Base article 360023226614.