To reconnect the F540 Wireless Headset:
NOTE: Before you try to reconnect your F540 Wireless Headset, make sure it is fully charged and turned off.
-
Plug the AC adapter into both the receiver and the wall, if they aren't already.
-
Press and hold the power button on the headset until the green LED begins to blink rapidly. This may take up to 10 seconds.
-
Lift the base station and press and hold the button on the bottom of the unit for one second. The power LED should blink and then become steady.
When the green power LED of the headset is a steady green, the headset is connected.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section