To set the alarms on the S400i clock radio dock, do the following:

1. Press and hold the Alarm 1 or the Alarm 2 button for 2 seconds until the hour light blinks.

2. Rotate the Control knob to select the hour, and then press the Control knob to set it. The minutes LED will begin to blink.

3. Rotate the Control knob to select the minutes, and then press the Control knob to set it. The source selection icon will begin to blink.

4. Rotate the Control knob to select the alarm source that you want to use (iPhone/iPod, FM, or Buzzer,) and then press the Control knob to set the source.

5. Once the alarm is set, you will see an alarm icon on the LCD that indicates the alarm is active. Alarm 1 is in the top left, and Alarm 2 is in the top right.

   To deactivate an alarm, press the corresponding alarm button. The alarm indicator will turn off.

NOTE: If iPhone/iPod is selected as the source and no device is docked, the dock will default to the buzzer as the source.