NOTE: Make sure the trigger is facing away from you and that the logo plate on the device is facing you.
- Turn the Locking Bezel (part B) counterclockwise until the Stick comes away from the base.
- Remove the Seal Ring (part C) by placing finger from your left and right hand under the ring on either side, and then lift up. The Seal Ring it stiff by design
- Pry apart the Locking Clamps (part D). These pull apart from the stick, but are under load from the spring. Take one half off first, hold the spring, and then remove the other half.
- Remove the Spring (part E), then either replace with a new Spring or leave the Spring off.