There are no Downloads for this Product
There are no FAQs for this Product
There are no Documents available for this Product
There are no Spare Parts available for this Product
There are no Gallery Images available for this Product
If your Revue does not turn on or start properly, select the option that describes your situation:
| No lights on the front of Revue |
Lights on, but no image on TV |
Image on TV but Revue is frozen |
- Disconnect the power from the back of Revue.
- Unplug your Revue from the wall or power strip. Ensure the connection between the Revue power cord and power supply is secure.
- Plug your Revue back into the wall or power strip.
- Reconnect the power to the back of Revue.
- Note: If this does not help, try plugging the Revue into a different wall plug or power strip.
|
- Disconnect the power from the Revue.
- Verify the HDMI cable at the HDMI Out port on the back of Revue is securely connected.
- Verify that the HDMI cable from the HDMI Out is securely connected to the HDMI In port of your TV or AV receiver.
- Reconnect the power to the back of Revue.
|
- Unplug the Revue.
- Hold down the reset button while plugging in the Revue. This will force the Revue to boot into a special recovery mode, which will re-download a new system image.
|
Frequently Asked Questions
Onboard Memory Manager is out of date. Please update to the most recent release.
Select Operating System to show Downloads.
There are no Downloads for Operating Systems not listed.
There are no Downloads for this Version.
