Logi Options+

CONNECT WITH THE USB RECEIVER

CONNECT USING BLUETOOTH

Press and hold the top and bottom buttons at the same time for three seconds. 
The LED starts blinking rapidly and then is available for Bluetooth pairing for three minutes.
Complete the Bluetooth pairing on your computer, tablet or phone.

Product Overview



1 – LED INDICATOR
Instant feedback on battery and connectivity status.

2 – LASER POINTER 
Press and hold to activate the laser.

3 – NEXT

• Simple press to navigate forward
• Press and hold to start presentation*

4 – BACK 

• Simple press to navigate backward
• Press and hold to show a blank screen*

5 – RECEIVER STORAGE
The USB dongle receiver can be stored in the remote.

* Requires the Logi Options+ App.


BATTERY AND POWER MANAGEMENT

BATTERY LIFE
The R500s runs for 12 months on a single AAA battery. When your battery is low, the R500s goes into a 'power-saving' mode – disabling the laser to extend battery life so you can continue presenting for an extra week.

NOTE: Battery life may vary on user and computing conditions.

CHECK YOUR BATTERY STATUS:
Press and hold the laser button: 

• If the LED is steady white, then the battery is good. 
• If the LED is pulsing red, the battery is low and the laser is disabled to save power

SMART POWER MANAGEMENT
The R500s automatically goes into deep sleep after 30 minutes of inactivity.

To prevent draining the battery when not used or when traveling, the R500s will instantly go to deep sleep if not connected to a computer. The laser will also be automatically stopped after a continuous press of 2 minutes.


LOGI Options+ Customization App Overview

Your Presentation remote is now supported by Logi Options+ App.

Logi Options+ allows you to customize your R500s to take your presentations to the next level. Start the presentation, navigate slides, show a blank screen, customize button functions, and monitor battery life.

The Logi Options+ App works on recent versions of Windows and macOS and can be downloaded at logi.com/optionsplus