To reconnect the F540 Wireless Headset:

NOTE: Before you try to reconnect your F540 Wireless Headset, make sure it is fully charged and turned off.

1. Plug the AC adapter into both the receiver and the wall, if they aren't already.

2. Press and hold the power button on the headset until the green LED begins to blink rapidly. This may take up to 10 seconds.

   

3. Lift the base station and press and hold the button on the bottom of the unit for one second. The power LED should blink and then become steady.

   

   When the green power LED of the headset is a steady green, the headset is connected.