There are three ways to connect your G650 speakers to your devices (PC, smartphone, tablet, etc.):

• USB (cable included)*
• Bluetooth**
• 3.5mm Auxiliary (cable not included)**

* For full access to LIGHTSYNC features, connect via USB and install Logitech Game Software (LGS).
** LIGHTSYNC features are limited using these connection methods.

Logitech Easy-Switch™ 
You can easily switch between up to four connected devices using either USB, 3.5mm, or Bluetooth connectivity.  Pause on one device and play on the other device. This allows for multiple device compatibility without having to switch sources.
 

---

USB

1. Connect the micro-USB connector to the port on the back of the subwoofer.
2. Connect the USB connector to your PC.
3. Turn on the speaker by pressing the recessed button on the back of the right satellite speaker.

   

   IMPORTANT: You may need to select the G560 speakers as the default audio output device in your operating system’s sound settings.

 

---

Bluetooth

1. With the speaker on, press and hold down the Bluetooth button on the back of the right satellite speaker for three seconds — you will hear a tone and the LED on the top front of the right satellite will blink blue rapidly.
2. On your Bluetooth device, activate Bluetooth and find and select the G560 Gaming Speaker from the Bluetooth devices list.
3. Once your speaker is connected to your device, the LED on the top front of the right satellite will turn solid blue.

   

   IMPORTANT: You may need to select the G560 speakers as the default audio output device in your operating system’s sound settings.

---

3.5mm Auxiliary

1. Connect one end of a male-to-male 3.5mm cable to the port on the back of the subwoofer.
2. Connect the other end of the male-to-male 3.5mm cable to your device’s 3.5mm auxiliary port.
3. Turn the speakers on.

   

   IMPORTANT: You may need to select your PC’s sound card as the default audio output device in your operating system’s sound settings.