There are two ways to set up your Squeezebox Touch - Wirelessly and via an Ethernet connection. Please select your preferred connection method below:

• Connect Squeezebox Touch via Wireless
• Connect Squeezebox Touch via Ethernet

Connect Squeezebox Touch via Wireless:

Wireless is the default connection method. To connect your Squeezebox Touch wirelessly, please do the following:

1. Plug in your Squeezebox Touch to an A/C power outlet.

2. Select your preferred language as shown below:

   

3. Click Continue:

   

4. Choose your Region:

   

5. Select ‘Connect to a wireless network’:

   

6. You will see a list of available wireless networks. Select the wireless network you wish to connect to:

   

7. You may need to enter an encryption key. Enter your encryption key and press Done on the Squeezebox Touch screen.

   

   If your router has the WPS feature, you may see the following screen:

   

   If your router has the WPS feature, and you wish to use the Push Button PBC method of connecting do the following:

   1. Choose “Use Push Button/PBC Method:

      

   2. Choose Start Timer:

      

   3. Go to your router and push the WPS button.

8. Your Squeezebox Touch will connect to the MySqueezebox.com server.

   NOTE: The server may update your Squeezebox Touch firmware.

9. Select ‘Create an account’ if you do not have a Squeezebox account, otherwise select ‘I already have an account’.

   

   NOTE: If you have already registered your Squeezebox Touch, select Continue and go to Step 14. To register it with a different account, select Register.

   

10. Enter your email address and press ‘Done’ on the Squeezebox Touch screen.

    

11. Select ‘Create a Password’ and enter or create the password for your MySqueezebox.com account.

    

12. Once you have entered your password, press ‘Done’ on the Squeezebox Touch screen.

    

13. Press Continue on the Squeezebox Touch screen.

    

14. Your Squeezebox Touch should now be wirelessly connected.

Connect Squeezebox Touch via Ethernet:

You can connect your Squeezebox Touch via a wired (Ethernet) connection. To connect via an Ethernet connection, please do the following:

1. Plug in your Squeezebox Touch to an A/C power outlet.

2. Select your preferred language as shown below:

   

3. Click Continue:

   

4. Choose your Region:

   

5. Select ‘Connect to ethernet network’:

   

6. Your Squeezebox Touch will connect to the MySqueezebox.com server.

   NOTE: The server may update your Squeezebox Touch firmware.

7. Select ‘Create an account’ if you do not have a Squeezebox account, otherwise select ‘I already have an account’.

   

   NOTE: If you have already registered your Squeezebox Touch, select Continue and go to Step 12. To register it with a different account, select Register.

   

8. Enter your email address and press ‘Done’ on the Squeezebox Touch screen.

   

9. Select ‘Create a Password’ and enter or create the password for your MySqueezebox.com account.

   

10. Once you have entered your password, press ‘Done’ on the Squeezebox Touch screen.

    

11. Press Continue on the Squeezebox Touch screen.

    

12. Your Squeezebox Touch should now be connected via Ethernet.

Additional Information:

If the above solutions do not resolve your problem, consult Knowledge Base article 16310 for instructions on contacting Logitech Technical Support.