- Faulty headset
- Firmware needs to be updated
Perform a hardware reset
- Plug in the G933 to USB power.
- Remove the left side plate (on the mic side).
- Press and hold the hardware reset switch with a pin for two seconds, as shown below. Repeat the two-second press twice.
Update G933 firmware
If the firmware update does not begin when you use LGS, you can manually update the firmware on your gaming headset using the Windows Command Prompt.
NOTE: Please make sure to disconnect all other headsets from your computer before beginning this firmware update.
- Make sure that both the headset and the wireless adapter are connected to the computer via USB connection before you run the update.
Wireless adapter
Headset
- Slide the power switch to ON
- In the Command Prompt window, type the following to locate the G933 firmware update utility, and then press Enter:
C:\Program Files\Logitech Gaming Software\FWUpdate\G933
- To run the utility with the /FORCE command, type the following command, and then press Enter:
G933Update_v27.exe /FORCE
- The utility will launch and begin the firmware update. Follow the on-screen instructions, and click Close once the update is complete.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
