Battery information
-
Requires 4 AAA alkaline batteries
-
Expected battery life is up to 6 months
Checking the battery status
You can check your Touch Lapdesk N600 battery status using the Logitech SetPoint mouse and keyboard software. See Knowledge Base article 23060 for instructions.
Installing new batteries
Install new batteries in your N600 by making sure they face the correct direction, as shown in the image below.
If the battery cover does not slide off easily, try pressing down directly on the marking on the battery cover and then sliding it. The battery door should slide off more easily now.
Extending battery life
Be sure to slide the touchpad in to turn off N600 whenever you are not using it.
Here are some other ways you can help extend the battery life:
-
Use only alkaline batteries. Non-alkaline batteries (such as NiMH,or NiCd) operate at a lower voltage and may affect the battery life.
-
Make sure replacement batteries are new and within the manufacturer's expiration date.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
