Software with all features that require admin privileges to install
Logitech Presentation Lite
Software with limited features that do not require admin privileges to install through USB only.
Download and install the Logitech Presentation Software.
Remove the pull-tab and USB receiver.
Plug the USB receiver into a USB port or connect via Bluetooth.
CONNECT WITH THE USB RECEIVER
CONNECT USING BLUETOOTH
Press and hold the top and bottom buttons at the same time for 3 seconds.
The LED starts blinking rapidly and then be available for Bluetooth pairing for three minutes.
Complete the Bluetooth pairing on your computer, tablet or phone.
1 – LED INDICATOR
Instant feedback on battery and connectivity status.
2 – LASER POINTER
Press and hold to activate the laser.
3 – NEXT
- Simple press to navigate forward
- Press and hold to start presentation*
4 – BACK
- Simple press to navigate backward
- Press and hold to show a blank screen*
5 – RECEIVER STORAGE
The USB dongle receiver can be stored in the remote.
* Requires Logitech Presentation Software installation.
BATTERY AND POWER MANAGEMENT
The R500 runs for 12 months on a single AAA battery. When your battery is low, the R500 goes into a 'power-saving' mode – disabling the laser to extend battery life so you can continue presenting for an extra week.
NOTE: Battery life may vary on user and computing conditions.
CHECK YOUR BATTERY STATUS:
Press and hold the laser button:
- If the LED is steady white, then the battery is good.
- If the LED is pulsing red, the battery is low and the laser is disabled to save power
|Battery is good
|Blinking rapidly white
|Device is attempting to pair using Bluetooth
|Low battery, laser is disabled to save power
SMART POWER MANAGEMENT
The R500 automatically goes into deep sleep after 30 minutes of inactivity.
To prevent draining the battery when not used or when traveling, the R500 will instantly go to deep sleep if not connected to a computer. The laser will also be automatically stopped after a continuous press of 2 minutes.
LOGITECH PRESENTATION SOFTWARE OVERVIEW
Logitech Presentation Software allows you to start the presentation, show a blank screen, customize button functions, monitor battery life, and set on-screen timers.
The software works on Windows and Mac and can be downloaded here.
1 — TIMER
Shows a clock or countdown timer on your presenter screen. Allows to set visual alerts at different times during your presentation
NOTE: The timer window is only seen when using a second screen as an ‘Extended display’.
2 — HOLD NEXT BUTTON
Start your presentation (can be customized).
3 — HOLD BACK BUTTON
Show a blank screen (can be customized).
4 — BATTERY STATUS
The icon shows the battery level.
We heard your feedback!
Now you can install the Logitech Presentation software without admin privileges on your favorite external flash drive. You can easily run it on any computer and get the most used features like advanced highlighting that the regular software has to offer.
Logitech Presentation Lite can be downloaded directly from the website or you can export it from your existing Logitech Presentation software.
To export an existing installation:
- Open the app.
- Click Present anywhere.
- Follow the on-screen instructions.
NOTE: When you choose the export option, the settings and customizations you have already made will also be migrated into the external storage device.
To download and install from the website:
- Download the lite version software.
- Make sure you have a flash drive plugged in with a minimum of 50 MB storage.
- Install the software and select the flash drive if there is more than one plugged in.
We recommend using the device's receiver to connect it to your computer.
Logitech Presentation Lite and Logitech Presentation comparison
|Advanced highlighting features
* Not all customizations are available.